KM Portal

Essential Work of Fracture and Acoustic Emission Study on Tpnr Composites Reinforced by Kenaf Fiber
Research Output | Dar Al-hikmah Library | IIUM Only

Kenaf fiber (KF) based thermoplastic natural rubber (TPNR) composite was produced by melt blending with polypropylene (PP). Kenaf fiber (15% by volume) and TPNR were mixed in as Haake 600p internal mixer. The fracture behavior of the TPNR matrix and of TPNR–kenaf (with and without maleic anhydride grafted polypropylene, MAPP) composites was evalu

Biological Treatment of Sewage Treatment Plant Sludge by Pure Bacterial Culture with Optimum Process Conditions in a Stirred Tank Bioreactor
Research Output | Dar Al-hikmah Library | IIUM Only

Biological treatment of sewage treatment plant (STP) sludge by potential pure bacterial culture (Bacillus sp.) with optimum process conditions for effective biodegradation and bioseparation was carried out in the laboratory. The effective and efficient bioconversion was evaluated with the treatment of pure bacterial culture and existing microbes (u

Protection of Natural Wetland Within Development Area: a Case Study of Tasik Melati
Research Output | Dar Al-hikmah Library | IIUM Only

Wetlands provide an important ecological function that contributes to watershed functions, most notably in pollutant removal, flood attenuation, groundwater recharge and discharge,shoreline protection, and wildlife habitat. However, despite of the many watershed services wetlands provide, the pressure from the development of a city is great. This r

Gender Differences and Stress Management Among Psychology Students
Research Output | Dar Al-hikmah Library | IIUM Only

This paper presents a study on gender differences in stress coping styles among psychology students in International Islamic University Malaysia. It is hypothesized that male respondents would be more likely to use problem-focused rather than emotion-focused coping style in dealing with stress as compared to the female respondents. A questionnaire

Statistical Optimization of Adsorption Process Fro Removal of 2,4-dichlorophenol by Activated Carbon Derived from Empty Fruit Bunches
Research Output | Dar Al-hikmah Library | IIUM Only

The adsorption capacity of activated carbon produced from empty fruit bunches (EFB) through removal of 2,4-dichlorophenol from aqueous solution was carried out in the laboratory. The activated carbon was produced by thermal activation at 8000C with 30 minutes of activation time. The adsorption process conditions were determined with the statistical

Impact of Wetland Urbanization in Kuala Lumpur, Malaysia
Research Output | Dar Al-hikmah Library | IIUM Only

Wetlands provide an important ecological function that contributes to watershed functions, most notably in pollutant removal, flood attenuation, groundwater recharge and discharge, shoreline protection, and wildlife habitat. However, despite of the many watershed services wetlands provide, the pressure from the development of a city is great. This

Behavior of Indented Sandwiches Structure with Nomex Honeycomb Core and Metallic Skins Subjected to Compressive Loading (Cai)
Research Output | Dar Al-hikmah Library | IIUM Only

A finite element model is proposed to determine the residual strength and the evolution of damage area of indented sandwiches structures with Nomex honeycomb core and metallic skins indented by a spherical indenter under longitudinal compression load (CAI). The honeycomb is represented by a grid of non-linear springs which its behavior law is obtai

الحور الإسلامي المسيحي في عصر الرسالة
Research Output | Dar Al-hikmah Library | IIUM Only

بما جرى على أرضها بين المهاجرين الأولين من المسلمين، والملك العادل النجاشي الذي يعد هو الأوحد من بين أقرانه من ملوك الأرض في حينه تقبلا لدعوة الإسلام، وفي هذا عظيم الشرف لتلك القارة التي انفرد

Activated Carbons Derived from Oil Palm empty-Fruit Bunches: Application to Environmental Problems
Research Output | Dar Al-hikmah Library | IIUM Only

Activated carbons derived from oil palm empty fruit bunches (EFB) were investigated to find the suitability of its application for removal of phenol in aqueous solution through adsorption process. Two types of activation namely; thermal activation at 300,500 and 800°C and physical activation at 150°C (boiling treatment) were used for the producti

Manufacturing Engineering Education in IIUM
Research Output | Dar Al-hikmah Library | IIUM Only

This paper presents how manufacturing engineering curriculum in International Islamic University Malaysia (IIUM) is designed to prepare its graduates fit for manufacturing industry. Since the inception in 1994, IIUM has been preparing its students through specialization in manufacturing engineering and precision machining. After 10 years, the curri

Category

KCDIOM

Type

KCDIOM

KM Portal